“BP’s commitment in the wake of the Deepwater Horizon incident is not only to restore the economic and environmental conditions among the affected areas of the Gulf Coast, but also to apply what we have learned to improve the way we operate,” said BP group chief executive Bob Dudley. “We believe the commitments we have outlined today will promote greater levels of safety and preparedness in deepwater drilling.”
The new voluntary standards are:
- BPXP will use, and will require its contractors involved in drilling operations to use, subsea blowout preventers (BOPs) equipped with no fewer than two blind shear rams and a casing shear ram on all drilling rigs under contract to BPXP for deepwater service operating in dynamic position mode. With respect to moored drilling rigs under contract to BPXP for deepwater drilling service using subsea BOPs, the subsea BOP will be equipped with two shear rams, which will include at least one blind shear ram and either an additional blind shear ram or a casing shear ram.
- Each time a subsea BOP from a moored or dynamically-positioned drilling rig is brought to the surface and testing and maintenance on the BOP are conducted, BPXP will require that a third party verify that the testing and maintenance of the BOP were performed in accordance with manufacturer recommendations and industry recommended practice (API RP 53).
- BPXP will require that laboratory testing of cement slurries for primary cementing of casing and exposed hydrocarbon-bearing zones relating to drilling operations of deepwater wells be conducted or witnessed by a BPXP engineer competent to evaluate such laboratory testing, or a competent third party independent of the cement provider. BPXP will provide laboratory results to the applicable BOEMRE field office within a reasonable period of time.
- BPXP’s Oil Spill Response Plan (OSRP) will include information about enhanced measures for responding to a spill in open water, near-shore response and shoreline spill response based on lessons learned from the Deepwater Horizon oil spill.
“BP is adopting these voluntary actions as part of its commitment to safe and reliable operations, and to help rebuild trust in the company following last year’s accident and oil spill,” said James Dupree, BP regional president, Gulf of Mexico. “BP is the largest lease holder in the deepwater Gulf of Mexico and we intend to be a significant business presence here for a long time to come. We look forward to implementing these best practices and sharing what we’ve learned.”
In addition to these four voluntary performance standards, BP has also implemented several actions that demonstrate commitment to excellence within its operations.
- Establishing a real-time drilling operations center in Houston.
- Assessing and increasing well control competencies.
- Collaboration with groups like Clean Gulf Associates and Marine Spill Response Corporation to augment and enhance industry response technology and capabilities.
- Support of the Marine Well Containment Company with containment knowledge, equipment and staff.
- Sharing the company’s experience in simultaneous operations, which incorporated the unprecedented use of remotely operated vehicles and close quarters management of marine response vessels and activities.
- Collaboration with BOEMRE, the Ocean Energy Safety Advisory Committee, the Center for Offshore Safety and others in a joint technology program focusing on BOP systems.
Source: BP, July 15, 2011;