UK oil and gas company Hurricane Energy is preparing for drill stem testing at its Lincoln Crestal well, which is located in the Greater Warwick Area offshore the UK.
Lincoln Crestal – the 205/26b-14 well – is the second well in a three-well program on Lincoln and Warwick (the Greater Warwick Area) being drilled in partnership with Spirit Energy following its farm-in to 50% of the Greater Warwick Area in September 2018. The wells are being drilled using the Transocean Leader semi-submersible drilling rig.
Lincoln Crestal was spudded on July 12, 2019. Hurricane said on Monday that the well had reached total depth of 1,780 m TVDSS, including a 720 m horizontal section of fractured basement reservoir.
According to the company, Lincoln Crestal operations have now moved onto preparation for drill stem testing.
Dr Robert Trice, Chief Executive of Hurricane, commented: “On the Greater Warwick Area, Lincoln Crestal well operations are now progressing to drill stem testing. We look forward to reporting the result shortly.”
Lancaster ‘above guidance’
Hurricane also said on Monday that the Lancaster Early Production System (EPS) availability and production since first oil is above guidance.
The start-up phase of the Lancaster EPS started with introduction of hydrocarbons on May 11, 2019. The first oil milestone was achieved on June 4, 2019.
For a significant portion of the period from first oil to date, production has been constrained by the use of only one of two subsea flowlines, as a result of operational necessity. This has limited maximum production capacity and Hurricane’s ability to carry out activities planned to increase the company’s understanding of the reservoir’s performance. Notwithstanding this constraint, since first oil, Lancaster EPS system availability, production and cash flow generation have been above company guidance/
Operations have now re-started with two flowlines. As operations move into the next phase of commissioning over the coming months, production and availability are likely to be constrained as certain planned works and delayed data gathering activities will require periods of production shut-in. Hurricane therefore expects system availability to revert towards prior guidance, being 45% for 3Q and 65% for 4Q.
Lancaster EPS performance
Average production rate at Lancaster EPS was c. 14,400 bopd from first oil to latest lifting on August 17, 2019, with total crude oil liftings of 1.2 million barrels over three cargoes.
Hurricane’s analysis of water production continues to indicate the presence within expected ranges of stranded or perched water, with no indications of aquifer water. Production over the last month has been through a single flowline and therefore water cut cannot be attributed between the two wells. The company said that further data will be available now that production through both flowlines has re-started. This will facilitate better understanding of individual well performance and water cut. It will also allow planned flow rate variation to be undertaken, in order to optimize well performance.
Forward commissioning for the Lancaster EPS over the coming months will include: Fuel gas compressor commissioning to reduce long-term flaring levels and operational expenditure; produced water system commissioning activities, and return to dual flowline operations
Trice said: “We are delighted to provide an update on Lancaster EPS progress and to communicate that our production levels have been above expectations for this early phase of operations. However, despite these promising results, we remain cognizant that it will take up to a year to acquire and interpret sufficient performance information to test our reservoir model of the field.
“Now that we are back to flowing the Lancaster wells through separate flowlines, we look forward to gathering data on individual well performance to help optimize well delivery as well as improve the company’s understanding of the reservoir’s performance.”
Spotted a typo? Have something more to add to the story? Maybe a nice photo? Contact our editorial team via email.
Also, if you’re interested in showcasing your company, product or technology on Offshore Energy Today, please contact us via our advertising form where you can also see our media kit.